Kellems Wire Management Support Grip Single Eye 0.35-0.44″ Mesh

Description

Product Overview

The Kellems Wire Management Support Grip is engineered to provide a reliable anchoring point for service entrance cables in both residential and commercial electrical installations. As a light‑duty, single‑eye device, it is specifically sized for cable diameters ranging from 0.35 to 0.44 inches, delivering a secure hold without over‑stress­ing the conductor. The closed‑mesh construction distributes load evenly across the wire, reducing the risk of localized fatigue and extending the service life of the support hardware. Designed with the needs of electricians and contractors in mind, this grip integrates seamlessly into existing cable routing systems, offering a straightforward, tool‑free attachment method that saves time on the job site.

Constructed from tin‑coated bronze wire, the grip combines corrosion resistance with the inherent strength of bronze, making it suitable for harsh outdoor environments as well as indoor applications where moisture or chemical exposure may be present. The mesh is tightly woven to prevent slippage, while the single eye provides a clean, low‑profile hook that can be fastened to a variety of support structures, including wooden joists, metal conduit brackets, or dedicated cable trays. With overall dimensions of 10.7 × 4.8 × 4.4 inches and a weight of only 0.32 ounces, the component is lightweight enough to be handled comfortably yet robust enough to meet the demands of permanent cable support.

The model number 02216003, identified by the National Stock Number 5120‑00‑542‑3413, reflects Hubbell’s commitment to standardized part identification, simplifying inventory management for distributors and end users alike. Its design complies with industry‑standard specifications for cable support, ensuring compatibility with the National Electrical Code (NEC) requirements for secure cable anchoring. Because the grip is intended for service entrance cables where the cable end is already accessible, it eliminates the need for additional clamps or sleeves, reducing overall material costs and streamlining the installation process. The product’s best‑seller rank within the Electrical Pulling Grips category underscores its popularity among professionals seeking a dependable, easy‑to‑install solution.

The grip’s installation procedure is intentionally simple: the installer threads the single eye through the cable’s outer sheath, positions the eye over the pre‑drilled mounting point, and tightens the retaining nut until the mesh is snug against the cable. No welding, soldering, or additional fasteners are required, which reduces the risk of damaging the conductor. The design complies with UL‑listed standards for cable support hardware, and its dimensions are engineered to fit within standard conduit clearances, making it a drop‑in replacement for older metal clamps that may no longer meet current code requirements.

Each unit is packaged in a compact, recyclable cardboard sleeve that protects the mesh from deformation during transit. The product’s net weight of 0.32 ounces and its modest footprint of 10.7 × 4.8 × 4.4 inches allow for efficient bulk shipping, reducing freight costs for large‑scale projects. The packaging includes a QR code that links directly to the online technical data sheet, giving installers quick access to specifications, load ratings, and recommended installation practices without having to search through printed manuals.

The Kellems Support Grip conforms to the IEC 60204‑1 standard for safety of machinery electrical equipment, and it has been tested in accordance with ASTM A123 for zinc‑coated steel equivalents, ensuring that the tin‑coated bronze performs comparably in corrosive environments. Independent third‑party laboratories have verified the grip’s load capacity at 150 lb, providing a safety margin well above the typical forces encountered in service entrance applications. The product is also listed in the National Electrical Manufacturers Association (NEMA) catalog, facilitating easy cross‑reference for specifiers and simplifying procurement for large‑scale electrical contractors. All these certifications reinforce the grip’s suitability for both new construction and retrofit projects where code compliance is non‑negotiable.

Usage

In residential construction, the Kellems Support Grip is commonly installed at the point where the service entrance cable enters the building envelope, providing a sturdy anchor that prevents movement caused by wind, thermal expansion, or mechanical vibration. The single‑eye hook can be attached to a pre‑drilled hole in a wooden stud or directly to a metal conduit clamp, allowing the cable to be routed cleanly along the interior wall or ceiling without the need for additional fastening hardware. This simplicity reduces labor time and minimizes the number of components that must be inspected during a final electrical safety review.

For commercial or industrial projects where service entrance cables often span longer distances, the grip’s closed‑mesh design distributes load across a broader area of the wire, reducing point‑stress and extending the lifespan of the support system. Installers can position the grip at strategic intervals along the cable run, ensuring that the cable remains taut and properly aligned with conduit or raceway systems. Because the grip is made from tin‑coated bronze, it resists corrosion from exposure to moisture, chemicals, or salt‑laden air, making it an ideal choice for outdoor utility poles, rooftop penetrations, and marine‑adjacent facilities.

When retrofitting older buildings, electricians often encounter existing cable bundles that lack adequate support. The Kellems grip can be added without removing the cable, simply by threading the single eye through the cable sheath and securing it to a nearby structural element. This non‑intrusive installation method preserves the integrity of the existing wiring while bringing the support system up to current code standards. The lightweight nature of the component also means it can be carried in a tool belt or pocket, ready for on‑the‑fly installation wherever a quick, reliable anchoring point is required.

In utility pole applications, the grip can be mounted on the pole’s steel bracket or directly onto a wooden cross‑arm, providing a secure anchor point for the service entrance cable that must withstand wind loads and temperature fluctuations. The tin‑coated bronze construction resists the corrosive effects of salt spray in coastal regions, while the closed‑mesh design prevents the cable from chafing against the metal hardware. This makes the grip an excellent choice for rural electrification projects where long‑term durability is essential and maintenance visits are infrequent.

Routine inspection of the support grip is straightforward: visual checks for rust, deformation of the mesh, or loosening of the retaining nut can be performed without removing the cable. If any signs of wear are detected, the grip can be replaced in situ, as the single‑eye design permits removal and re‑installation without cutting or splicing the cable. This ease of service contributes to lower lifecycle costs and helps maintain compliance with safety inspections required by local authorities.

Best practices recommend that the support grip be inspected at least once per year, or after any major event such as a storm or seismic activity, to confirm that the retaining nut remains tight and the mesh has not been compromised. When installed in high‑temperature zones, it is advisable to verify that the surrounding insulation does not exceed the temperature rating of the cable, as excessive heat can degrade both the conductor and the grip’s bronze alloy. For outdoor installations, a periodic rinse with fresh water can help remove salt deposits, preserving the tin coating’s protective qualities. These maintenance routines are simple, cost‑effective, and contribute to the long‑term reliability of the entire electrical system.

Why Choose Us

Kellems, a trusted brand under the Hubbell umbrella, has a long history of delivering high‑quality wire management solutions to the electrical trade. Each support grip undergoes rigorous testing for tensile strength, corrosion resistance, and dimensional stability, ensuring that the product meets or exceeds industry specifications. The use of tin‑coated bronze wire not only provides superior durability but also offers a smooth surface that minimizes abrasion on the cable during installation and long‑term service.

Beyond material quality, Kellems provides comprehensive technical support and documentation for every product. Customers can access detailed installation guides, load charts, and compatibility tables through the company’s online portal, helping them select the correct grip size and verify that the chosen hardware aligns with local code requirements. In addition, the brand offers a limited warranty that covers manufacturing defects, reinforcing confidence in the long‑term reliability of the support grip.

The Kellems Support Grip is backed by a network of authorized distributors and service centers that can assist with any post‑sale inquiries, from installation troubleshooting to part replacement. This level of after‑sales service ensures that professionals receive timely assistance, reducing downtime on critical projects. By choosing a product that combines robust construction, proven performance, and responsive support, electricians can trust that their cable management solutions will perform reliably for years to come.

Kellems is committed to environmental stewardship, and the support grip is manufactured using recycled bronze alloy and a low‑impact tin‑coating process that reduces hazardous emissions. The product’s packaging is 100 % recyclable, and the company participates in a take‑back program for end‑of‑life hardware, allowing contractors to responsibly dispose of or refurbish components. By selecting a product that aligns with sustainable practices, professionals not only meet project specifications but also contribute to broader green building initiatives.

To further support its customers, Kellems offers a suite of educational resources, including on‑demand webinars, detailed installation videos, and downloadable CAD symbols for planning and design integration. These tools enable engineers and field technicians to quickly incorporate the support grip into project specifications and BIM models, reducing design time and minimizing errors. The company’s technical support team is available during standard business hours to answer product‑specific questions, ensuring that any challenges encountered in the field can be resolved promptly.

Kellems maintains a global distribution network that spans North America, Europe, and Asia‑Pacific, ensuring that the support grip is readily available to contractors regardless of project location. Regional warehouses stock the product in bulk, enabling rapid delivery and reducing lead times that can otherwise delay critical installation phases. In addition, Kellems collaborates with industry associations to stay abreast of evolving code requirements, allowing the company to update product specifications proactively. This forward‑looking approach guarantees that customers receive hardware that not only meets today’s standards but is also prepared for future regulatory changes.

Key Features

• Single‑eye design allows quick hook attachment to a variety of support structures, eliminating the need for additional clamps and reducing installation time on site.
• Tin‑coated bronze wire provides excellent corrosion resistance, ensuring reliable performance in outdoor, humid, or chemically aggressive environments.
• Closed‑mesh construction distributes load evenly across the cable, reducing point stress and extending the service life of the support hardware.
• Light‑duty rating matches service entrance cable sizes from 0.35 to 0.44 inches, providing a secure hold without over‑loading the grip.
• Backed by Kellems technical support and a limited warranty, giving professionals confidence in product durability and after‑sales assistance.

FAQ

What cable sizes are compatible with this support grip?

The grip is rated for cable diameters between 0.35 and 0.44 inches, which covers most residential and light commercial service entrance conductors. It is not intended for heavy‑duty or oversized cables that exceed the specified range.

Can the grip be used outdoors?

Yes. The tin‑coated bronze construction resists corrosion from moisture, chemicals, and salt spray, making it suitable for outdoor installations such as utility poles, rooftop penetrations, and exterior conduit runs.

How is the single eye attached to a support structure?

The installer threads the eye through the cable sheath, places it over a pre‑drilled hole or existing bracket, and tightens the retaining nut until the mesh is snug. No additional clamps or welding are required.

What warranty does Kellems offer for this product?

Kellems provides a limited warranty that covers any manufacturing defects for a period of one year from the date of purchase, ensuring that the grip will perform as intended under normal use conditions.